NEWS: Eachine Aurora 90, the full carbon 2S brushless Whoop

[Drone News]

The Eachine racer of the day …. (so much active… with probably a lot of OEM compagnies behind), the aurora 90: http://www.banggood.com/Eachine-Aurora-90-90mm-Mini-FPV-Racing-Drone-BNF-wF3-OSD-10A-BLheli_S-Dshot600-5_8G-25MW-48CH-VTX-p-1114799.html. It’s a 90mm brushless racer with all last technologies of ESC (BLheli_S supporting Dshot), FC (SPF3), motors (1104) and even including a builtin OSD !!!!. Here almost all elements are in 3K carbon even the ducted system…. So it should much more crash resistant. In the other the machine standalone weights already 72.7g. So with the 2S 450mAh LIpo, the total weight will be around 100g…. so not super indoors FPV friendly. The FPV part is done by a 25mW AIO camera. Maybe a 200mW would have been a better choice since outdoors applications will be mainly targetted.

Description:
Brand name: Eachine
Item name: Aurora 90 Mini FPV Racing Drone BNF
Wheelbase: 90mm
Size: 118mm*118mm*70mm
Weight: 73g( battery not include)
Motor: Eachine 1104 7500KV brushless motor
ESC: 10A BLHELI_S 16.5 1-2S 4 in 1 ESC Dshot600
Propeller: 50mm 4-blades propeller
Receiver: Frsky/DSMX/Flysky AFHDS2A (optional)
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL video transmitter
Flight controller: Halocube Betaflight F3 6DOF built-in OSD
OSD: Betaflight OSD
Firmware of flight controller: Betaflight 3.1
Flight time : 3-4minutes
Rear LED Ready (LED_Strip function)
Buzzer Ready
Battery: 7.4V 450mah 80C lipo battery
Charger: B3PRO 2S balance charger
Minicube F3 6DOF flight controller:
Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD (Batt voltage, RSSI, Artificial Horizon, Fly mode, Flytime, Craft name etz.)
Firmware version: Betaflight 3.1 Dshot ready
Target: OmnibusF3
Minicube 10A BLHELI_S 4 in 1 ESC Dshot600:
Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Firmware version: BLHELI_S 16.5
BB2, 48MHZ Chip
Lipo Battery: 1-2S
Con. Current: 10A
Peak Current: 15A (10S)
BEC: 5V @0.1A
Programming: YES
Betaflight passtrough ready
Dshot600 ready(Default)
Support oneshot42 oneshot125 Multishot Dshot
Damped light on

Features:
Extremely light and more powerful
STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
Adjustable Angle of camera
Jaw-dropping flight performance
Cleanflight/Betaflight support
Acro mode / Air mode /Angle mode support
Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
OSD Configuration has been include in BETAFLIGHT GUI
Radio Stick to control PID Tunes
BLHELI_S pass-through ready
Telemetry RSSI Output ready

Notice:

1. BNF receiver (intergrated buzzer) option:
Compatible Frsky SBUS receiver
Compatible Flysky 8CH AFHDS2A receiver
Compatible Specktrum DSM2/DSMX receiver

2. Compatible:
1). Frsky Receiver compatible with FRSKY ACCST, X9D(Plus)DJT/DFT/DHT
2). Flysky Receiver compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F.
3). DSM2/DSMX Receiver compatible wiht Satellite receiver.

Package included:
1 x Eachine Aurora 90 Frame kit
1 x Betaflight F3 6DOF flight controller build-in OSD
1 x Frsky/DSMX/Flysky AFHDS2A (optional)
4 x Eachine 1104 7500KV brushless motor
1 x Minicube 10A BLHELI_S 16.5 1-2S 4 in 1 ESC Dshot600
4 x 50mm 4-blades propeller CW
4 x 50mm 4-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8g 25MW 48CH NTSC/PAL VTX
1 x 7.4V 450mah 80C lipo battery
1 x B3PRO 2S balance charger

Cet article NEWS: Eachine Aurora 90, the full carbon 2S brushless Whoop est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article