NEWS: Eachine Aurora 100

[Drone News]

Just 1 month later the Eachine Aurora 90, here is the Aurora 100: http://www.banggood.com/Eachine-Aurora100-100mm-Mini-Brushless-FPV-Racer-BNF-w-F3-OSD-10A-Dshot600-5_8G-25MW-48CH-VTX-p-1127606.html. No more the ducted/carbon prop guards system and its prop strike problems, but we have more a classic H structure more lighter but without prop protection. For the electronics, it’s simple, it’s exactly the same than the EA90: a eachine minicube with 4-in-1 10A ESC BLheli_S Dshot600 ready, a F3 omni board with a builtin Betaflight OSD and the classic CMOS 1/4″ 600TVL 48CH AIO 25mW FPV cam. As always, three choices of receiver: FrSky D8 (working telemetry), Spektrum DSM2/X and FlySky AFHDS-2A. I hope the rear right motor drop and drifting problems will be solved with this new revision/variation. These two former problems are really annoying for the EA90 killing all the benefit of the great associated electronics.

For the Aurora100, the microUSB port of the Eachine minicube is fully available (without disassembling the duct system for the EA90)

Still JST connector

Description:
Brand name: Eachine
Item name: Aurora 100 Mini FPV Racing Brushless Drone BNF
Wheelbase: 100mm
Size: 120mm*120mm*65mm
Weight: 61.7g( battery not include)
Motor: Eachine 1104 7500KV brushless motor
ESC: 10A BLHELI_S 16.5 1-2S 4 in 1 ESC Dshot600
Propeller: 50mm 4-blades propeller
Receiver: Receiver: Frsky/DSMX/Flysky AFHDS2A (optional)
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Flight controller: Minicube Betaflight F3 6DOF Flight controller built-in OSD
OSD: Betaflight OSD
Firmware of flight controller: Betaflight 3.1
Flight time: 3-4minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 7.4V 450mah 80C lipo battery
Minicube F3 6DOF flight controller:
Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Processor: STM32 F303 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
Firmware version: Betaflight 3.1 Dshot ready
Target: OmnibusF3
Minicube 10A BLHELI_S 4 in 1 ESC Dshot600:
Size: 27mm*27mm*5mm
Mount hole: 20mm*20mm
Firmware version: BLHELI_S 16.5
BB2, 48MHZ Chip
Lipo Battery: 1-2S
Con. Current: 10A
Peak Current: 15A (10S)
BEC: 5V @0.1A
Programming: YES
Betaflight passtrough ready
Dshot600 ready(Default)
Support oneshot42 oneshot125 Multishot Dshot
Damped light on

Features:
Extremely light and more powerful
STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
Adjustable Angle of Camera
Jaw-dropping flight performance
Betaflight support
Acro mode / Air mode /Angle mode support
Built-in OSD (Using F3 MCU controls OSD over SPI bus in DMA mode)
OSD Configuration has been include in BETAFLIGHT GUI
Radio Stick to control PID Tunes
BLEHELI_S pass-through ready
Telemetry RSSI Output ready

Notice:

1. BNF receiver (intergrated buzzer) option:
Compatible D8 modee SBUS receiver (RSSI ready)
Compatible Flysky 8CH AFHDS2A receiver
Compatible Specktrum DSM2/DSMX receiver

2. Compatible:
1). Frsky Receiver compatible with FRSKY ACCST, X9D(Plus)DJT/DFT/DHT
2). Flysky Receiver compatible with FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F.
3). DSM2/DSMX Receiver compatible with Satellite receiver.

Package include:
1 x Eachine Aurora 100 Frame kit
1 x Betaflight F3 6DOF flight controller build-in OSD
1 x Frsky/DSMX/Flysky AFHDS2A Receiver (optional)
4 x Eachine 1104 7500KV brushless motor
1 x Minicube 10A BLHELI_S 16.5 1-2S 4 in 1 ESC Dshot600
4 x 50mm 4-blades propeller CW
4 x 50mm 4-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8g 25MW 48CH NTSC/PAL VTX
1 x 7.4V 450mah 80C lipo battery (comes without charger)
1 x WS2812 LED Board

Cet article NEWS: Eachine Aurora 100 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article