NEWS: Eachine Aurora 68 (48g, F3 omni+BF OSD, 10A BLheli_S/Dshot600, 1102/11500Kv)

[Drone News]

Want a shrinked (and hope fixed) version of the Eachine Aurora 90 ?. Here is the 68mm version: http://www.banggood.com/Eachine-Aurora-68-68mm-Mini-5_8G-600TVL-FPV-Racing-Drone-BNF-with-F3-OSD-48CH-25mW-VTX-p-1132680.htmlThe new model keeps exactly the same electronic ingredient except for motors, now we have 1102 smaller and lighter but still 2S compatible. The other elements remain the same: eachine minicube with F3 omni+betaflightOSD, 4-in-1 10A BLHeli_S Dshot600 ESC and for the last layer one of these three choices of receiver: FrSky D8,Spektrum DSM2/X and FlySky AFHDS-2A. If of the new version they solved the three known problems of the EA90: Prop hitting the aluminium standoff, some drifts in angle mode and some sudden up-tilt after hard turns, the new EA68 can be a fantastic indoors and indoors flyer. Probably a direct comptitor of the new Emax Babyhawk. Announced flight time is poor … only 3min despite a 400mAh LiPo.. Strange. I guess the final total weight will be around 70g. Let’s cross finger and wait & see. I will ask to review one

Specification:
Brand Name: Eachine
Model: Aurora 68
Item Name: Eachine Aurora 68 68mm Mini FPV Racing Drone
Wheelbase: 68mm
Size: 93mm*93mm*50mm

Weight: 48g( battery not include)

Receiver: ( Optional)
-Specktrum DSM2/DSMX Compatible receiver
-Flysky 8ch AFHDS2A receiver
-Frsky SBUS D8 mode receiver (RSSI Output)

Motor: Eachine 1102 KV11500 brushless motor
ESC: 10A BLHELI_S 16.5 1-2S 4 in 1 ESC Dshot600
Propeller: 38.1mm 4-blades propeller
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL video transmitter
Flight Control: Minicube F3 Flight controller built-in OSD
OSD: Betaflight OSD
Firmware of flight controller: Betaflight 3.1
Flight time : 3 minutes
Rear LED Ready (LED_Strip function)
Buzzer Ready
Battery: 7.4V 400mah 40C lipo battery

Flight controller Specification:
-Size:27mm*27mm*5mm
-Mount hole: 20mm*20mm
-Processor: STM32 F303 MCU
-Sensor: SPI Sensor MPU6000
–Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
-Firmware version: Betaflight 3.1 Dshot ready
-Target: OmnibusF3

ESC specification:
-Size:27mm*27mm*5mm
-Mount hole: 20mm*20mm
-Firmware version: BLHELI_S 16.5
-BB2, 48MHZ Chip
-Lipo Battery: 1-2S
-Con. Current: 10A
-Peak Current: 15A (10S)
-BEC: 5V @0.1A
-Programming: YES
-Betaflight passtrough ready
-Dshot600 ready(Default)
-Support oneshot42 oneshot125 Multishot Dshot
-Damped light on

Features:
-Extremely light and more powerful
-STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
-Adjustable Angle of Camera
-Jaw-dropping flight performance
-Betaflight support
-Acro mode / Air mode /Angle mode support
-Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
-OSD Configuration has been include in BETAFLIGHT GUI
-Radio Stick to control PID Tunes
-BLEHELI_S pass-through ready
-Frsky Mode :Telemetry RSSI Output ready

Package Included:
1x Aurora 68 68mm Drone
1x Battery
1x Manual

Cet article NEWS: Eachine Aurora 68 (48g, F3 omni+BF OSD, 10A BLheli_S/Dshot600, 1102/11500Kv) est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article