Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: RealAcc Orange85 (3S brushless Whoop)


Recommended Posts

Want an upgraded Eachine Chaser88 compatible with 3S and including directly a 200mW VTX, a prop guard and stronger motor ?. Here is the RealAcc Orange85: http://www.banggood.com/Realacc-Orange85-F3-FPV-Racer-BNF-Dshot-10A-ESC-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-Camera-2-3S-p-1139956.html

RealAcc is probably the deluxe division of Eachine like XK is for WLtoys. With this new ducted brushless Whoop 85mm racer, the main frame is carbon based but the prop-guard seems 3D printed. Don’t expect too much from it… especially in 3S at full spead. The FC is F3, no idea if there is a buitlin betaflight OSD, probably not. ESC are installed in a 4-in-1 board. Announced to be 10A (peak @15A) and flashed with BLheli_S/Dshot600 firmware. Two choice of receivers are proposed; FrSky D8 and FlySky AFHDS-2A compatible. Notice motors are 1106 model so the largest in the 11’s series. The weight given is partially false, I guess only the weight w/o battery should be more correct. So total weight will exceed 100g IMHO. I really like the choice of the orange, probably the best to find a lost model. More, a builtin buzzer is integrated too.

null
null
null
null
null
null
null
null
null

Specification
Chaser88 Frame 

Package: 260x120x165mm
Weigh(without battery): 88.7g
Weight (with battery): 88.2g
Package Weigh: 179g
 
Compatible with 1935 propeller
Compatible with 1106 motor
Can be used with 2-3S battery (Real Test  from factory)
Wheelbase: 85mm
Flight time: 3-5 mins
Batterry:  3S 450mah
With direction indicator LED

ESC
Model: BLHELI-S 10A
Con. Current: 10A
Peak Current: 15A (10S)
Firmware version: BLHELI_S 16.5
BEC: NO
Li-Po Battery: 2-3S
Programming: Yes
Weight: 13G
Size(PCB): 27 x 27 x 5mm
M3 install Pitch: 20 x 20mm
BB2, 48MHZ Chip
Programming: YES
Betaflight passtrough ready
Dshot600 ready(Default)
Support oneshot42 oneshot125 Multishot Dshot

Motor
Height: 18.8mm
Width: 14mm
Weight: about 6.5g
Shaft: f1.5mm
KV (rpm/V): 6000
Voltage: 3.7-11.1V
Battery: 1-3S lipo batter

Flight Controller
F3+BEC
Input: 2-4S LIPO
Output voltage: 5V/3A
STM32F3 CPU
ICM-20608-G Accelerometers and Gyroscopes SPI
MicroUSB socket
Weight: 3.68g
Size(PDB): 27x27mm
M3 hole: 20x20mm

Receiver
Frsky receiver:
Compatible Frsky 8CH Receiver
Work mode :D8 Mode
Output: PPM/SBUS
Number of channels: 8
Range: Approx 800m
Weight: 3g
Dimensions: 12 x 25mm

Flysky receiver:
Item Name:FS-A8S Receiver
Channels: PPM 8CH, i-BUS 18CH
Model type: Multi-rotor
Frequency range: 2.408-2.475GHz
Band width: 500KHz
Band number: 135
RX Sensitivity: -92 dBm
2.4GHz system: AFHDS 2A
Modulation type: GFSK
DSC port: PPM/i-BUS/S.BUS
Transfer method: FHSS
Data output: 1.5mm*3 Pin  PPM/i-BUS/S.BUS
Size: 20*14*5.3mm

AIO FPV Transmitter  Camera
Output power: 200mW
Input power: 3.3-5V
Current consumption: 3.3-5V, 500mA (type)
Camera resolution: 600TVL
Video system: NTSC
Mini illumination: 1 lux
Field of view: 120 degree viewing angle
Antenna dimensions: 22x29mm diameter
Antenna: 4 lobe right hand circular polarized
Frequency: 5.8GHz 5 bands 40 channel
Size:  20x13x6mm
Weight: 4.57g

Cet article NEWS: RealAcc Orange85 (3S brushless Whoop) est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...