NEWS: XF100 (100mm, 2S, 1104/8000Kv, F3+betaOSD, 25mW/800TVL AIO)

[Drone News]

100mm brushless racers are now inviding the market. After the Aurora 90, the ARfun 90, the Lantian 90L here is the XF100: http://www.gearbest.com/brushless-fpv-racer/pp_623259.html. What we know: a F3 omnibus with betaOSD, 1104/8000Kv (2s only probably), 800TVL CMOS FPV cam + 25mW VTX (no indication of number of supported bands), 4-in-1 6A BLheli_S ESC board (definitively not compatible with 3S system). The rear programmable LEDs’s bar and a builtin buzzer. Notice the 5.8G cloverleaf antenna is protected by an antenna guard.

Main Features:
– Powerful propulsion system intended for professional FPV racing
– Bright 7-color LED ensures the good visibility and flight safety at night
– Self-balancing, semi-self-balancing, and manual mode for players in different levels
– Excellent CMOS sensor provides image effect as excellent as that of CCD sensor
– Extremely wide angle of view, 150-degree FOV, and 170-degree DFOV

Specifications:
General
Wheelbase: 100mm
Brushless motor: 1104 8000KV
Propeller: 1935 five-blade
ESC: 4-in-1 6A ( 10A burst current )
LED board: 7-color, with buzzer
Battery: 7.4V 450mAh 30C LiPo
Flight time: 3 – 5 minutes
Charge time: 40 minutes

F3 Flight Controller
With gyroscope, compass, and space for accelerometer and barometer
Supports manual mode, horizontal mode, headed / headless mode
Radio signal input: standard signal, CPPM ( PPM SUM )
Low voltage detection and alarm: yes
Open-source FC, firmware upgradable via micro USB port

FPV Camera
Sensor: 1/4 inch CMOS
Resolution: 800TVL
Angle of view: 150-degree FOV, 170-degree DFOV
TV system: PAL / NTSC switchable
Power consumption: 380mA at 3.7V
Power supply: 3.6 – 5.5V
Output impedance: 75 ohm
Output signal strength: 23 – 24dBm
Output power: 25mW
Frequency: 5.8GHz
Number of channels: 40
Audio frequency carrier: 6.5MHz

Cet article NEWS: XF100 (100mm, 2S, 1104/8000Kv, F3+betaOSD, 25mW/800TVL AIO) est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article