NEWS: Eachine Lizard 95 (110g, F3 omni+Betafight, 10A BLheli_S ESC, 1104/6000, 3S setup)

[Drone News]

This is the new brushless racer of the week for Eachine: http://www.banggood.com/Eachine-Lizard95-95mm-F3-FPV-Racer-BNF-4-in-1-10A-ESC-OSD-5_8G-48CH-25MW100MW-VTX-600TVL-Camera-3S-p-1141589.html. More or less based on the same electronic of the Aurora’s serie (F3 omni + betaflight OSD, 4-in-10A BLheli_S/Dshot 600 board, we have some little modification to be fully 3S conpatible. First motors are 1104/6000Kv instead of classic 1104/7500Kv and now 100% 3S guaranted. The model comes now with a 550 3S Mah. Annouced to reach 110g AWG. As usual, three choices of receiver are offered (FrSKy D8 w/ telemetry), FlySky (AFHDS-2A) and specktrum DSM2/DSMX. Good news, the VTX power can pushed up to 100mW from 25mW. 48CH are supported.

Specification:
Brand name: Eachine
Item Name: Lizard95 95mm Micro FPV RACING DRONES BNF
Size:115mm*115mm*60mm
Weight: 66( battery not include)
Flight controller: Betaflight F3 Flight controller built-in OSD
Motor: Eachine 1104 KV6000 brushless motor
Propeller: 50mm 5-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW/100MW Switchable 48CH NTSC/PAL Video transmitter
Battery: 11.1V 550mah 40C lipo battery
OSD: Betaflight OSD
Firmware of Flight controller :Betaflight 3.1
Flight time : 4minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready

Receiver Option:
-Compatible Frsky D8 modee SBUS receiver (RSSI ready)
-Compatible Flysky 8ch AFHDS2A receiver Ibus output with Failsafe
-Compatible Specktrum DSM2/DSMX receiver

Flight controller Specification:
-Size:27mm*27mm*5mm
-Mount hole: 20mm*20mm
-Processor: STM32 F303 MCU
-Sensor: SPI Sensor MPU6000
-Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
-Firmware version: Betaflight 3.1 Dshot600 ready
-Target: OmnibusF3
-Work voltage: 2S-3S lipo battery

ESC specification:
-Size:27mm*27mm*5mm
-Mount hole: 20mm*20mm
-Firmware version: BLHELI_S 16.5
– BB2, 48MHZ Chip
-Lipo Battery: 2S-3S
-Con. Current: 10A
-Peak Current: 15A (10S)
-BEC: 5V @0.1A
-Programming: YES
-Betaflight pass-trough ready
-Dshot600 ready(Default)
-Support oneshot42 oneshot125 Multishot Dshot
-Damped light on
 
Features:
-Extremely light and more powerful 3S power makes the Whisper 95 like a beast
-STM32 F303MCU + BLHELI_S ESC make your Operating feel more stability and silky
-Adjustable Angle of Camera
-Adjustable VTX Power 25mw/100mw
– Jaw-dropping flight performance
-Betaflight support
-Acro mode / Air mode /Angle mode support
-Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
-OSD Configuration has been include in BETAFLIGHT GUI
-Radio Stick to control PID Tunes
-BLEHELI_S pass-through ready
-Telemetry RSSI Output ready(Frsky Version)
 
Package include:
1 x Eachine Lizard95 Frame kit
1 x Betaflight F3 6DOF flight controller build-in OSD
1 x Compatible Frsky/DSMX/Flysky AFHDS2A Receiver(optional)
4 x Eachine 1104 6000KV brushless motor
1 x Minicube 10A BLHELI_S 16.5 2s-3S 4 in 1 ESC Dshot600
4 x 50mm 5-blades propeller CW
4 x 50mm 5-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch  camera
1 x 5.8g 25MW/100MW Adjustable 48CH NTSC/PAL VTX
1 x 11.1V 550mah 40C lipo battery XT30 plug
1 x WS2812 LED Board
1 x Buzzer(Integrated in Receiver)

Cet article NEWS: Eachine Lizard 95 (110g, F3 omni+Betafight, 10A BLheli_S ESC, 1104/6000, 3S setup) est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article