NEWS: LANCHI Monster 76mm

[Drone News]

The new micro FPV racer of the day… Today it’s a new chinese brand “LANCHI” with “Monster 76mm” model: http://www.gearbest.com/brushless-fpv-racer/pp_631767.html and according the caracteristics and design !!! it’s promising!!!!.

We have compact 76mm microFPV racer witha F4 FC integrating a builtin betaflight OSD … .So thanks to the F4 MCU, we will enjoy faster PIDs loop so an even more stable and reactive machine. For the ESC, a 4-in-1 10A BLheli_S/Dshot 600 ready couples with 1104/8000KV so 2S compatible only …The AIO camera is 700TVL CMOS model with a 48CH/25mW VTX. The monster 76mm can be found without receiver or with a FrSKy D8 or Flysky AFHDS-2A variant. For the frame, 2mm of thickness, a real carbon camera mount … Props are 1630 triblades model… The weight without the battery, around 53g… should turn around 70g with the 500mAh LiPo. No prop guard but there is a builtin buzzer …. can be a gread little fast outdoors flyer… I like it already but this machine will need a lot of spare props

Description:
LANCHI Monster 76mm micro FPV racing drone uses the superior F4 flight controller and more powerful 8000KV high RPM brushless motor. Its camera features a higher resolution – 700TVL, giving you a clearer aerial view; and the integrated video transmitter has 48-channel full coverage intended for the professional competition.
This extraordinary multirotor is equipped with the latest 4-in-1 BLHeli – S 10A DShot ESC, making motors respond more accurately and rapidly, so every moment in the air is like flying on rails.

Main Features:
– High-performance F4 flight controller with integrated OSD
– Powerful 1104 8000KV brushless motor, 4-in-1 BLHeli – S 10A DShot ESC
– 700TVL AIO FPV camera with 5.8G 48CH 25mW VTX, impact-resistant antenna
– Programmable LED board and 80dB buzzer, 2-in-1 design

Note:
The propeller color ( red, yellow, transparent ) will be shipped at random.
Specifications:
General
Brushless motor: 1104 8000KV ( only supports 2S LiPo )
Propeller: 1630 tri-blade ( red, yellow, transparent at random )
Battery: 7.4V 500mAh 20C LiPo ( built-in )
Weight: 53g ( excluding battery )

Carbon Fiber Frame
Wheelbase: 76mm
Material: 3K full carbon fiber
Main board thickness: 2mm
Lateral board thickness: 1.5mm

F4 Flight Controller
Processor: STM32F405RGT MCU
IMU: MPU6000 connected via SPI
Version: 6DOF ( no barometer nor electronic compass )
BEC output: 5V 1A
Integrated OSD: yes
Firmware: BetaFlight 3.1.0 OMNIBUSF4
Function: supports buzzer, voltage monitoring, LED ESC programming
Power supply: 2 – 4S LiPo
Compatible receiver: SBUS, PPM, DSMX receivers
Mounting hole: M2.5, 20mm spacing
Dimension: 27 x 27mm
Weight: 8.5g

4-in-1 ESC
Processor: EFM8BB21F16G
MOSFET: TPN2R703NL
Power supply: 2 – 4S LiPo / HV LiPo
BEC output: no
Continuous current: 4 x 10A
Burst current: 4 x 15A ( up to 5 seconds )

AIO FPV Camera
Horizontal resolution: 700TVL
Input voltage: 5V
TV system: NTSC / PAL ( auto )
Field of view: 120 degree ( horizontal ), 100 degree ( vertical )
Impedance: 50 ohm
Video transmitter: 5.8G 48CH 25mW

Different Versions:
PNP: no receiver
BNF FrSky Receiver: 2.4GHz 8CH, 600m receive distance, PPM / SBUS signal output, 5V input voltage, compatible with DHT / DFT / DJT / XJT / X9D Plus / X9E transmitter
BNF FLYSKY Receiver: 2.4GHz 8CH, more than 400m receive distance, PPM / SBUS signal output, 3.3 – 5.0V input voltage, only compatible with AFHDS 2A transmitters

Cet article NEWS: LANCHI Monster 76mm est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article