NEWS: Eachine TeenyCube, a 8.8g 20mmx20mm 3-in-1 cube

[Drone News]

Everybody knows probably the Eachine Minicube installed in a lot of last Eachine Racers (AUrora 68, 90, 100 Lizard 95 for example). Here is another more compact version 20mmx20mm only !!: https://www.banggood.com/15x15mm-Eachine-TeenyCube-Flytower-Frsky-XSR-E-Receiver-F3-Flight-Controller-6A-2-in-1-ESC-p-1156647.html

Here, the Eachine TeenyCube is clearly copying the amazing work of the TeenyFish compagny, at least for the FC. We have a 3 layers electronic cube with:
i) at lower position a 4-in-1 6A BLheli_S/Dshot ready ESC board + 5V@1A PDV with a peak up to 10A and compatible with 2S setup
ii) in the middle, a F3 omnibus board but not builtin betaflight (the next TeenyFish FC will integrate one)
iii) and a FrSky D16 with telemetry and diversity antenna

A 8.8g solution !!!! amazing. You can use this cube with some 0703, 0704, 0705 brushless motors… everything should be under 15g.

Specification:
Brand Name: Eachine
Item Name:Flight Controller & ESC & Receiver Flytower
Mounting Hole: 15x15mm
Size: 20x20mm
Weight: 8.8g

Eachine & Frsky XSR-E Telemetry Receiver:
Introduction: Original Frsky Product, which has same function as XSR Receiver. Only the cable is diffirent

– Channel: XSR-16CH(1-16CH from SBUS channel, 1-8ch from CPPM Channel)
– Dimension: 20×20 mm
– Mounting Hole: 15×15 mm
– Weight: 1.8g
– Operating Voltage Range: 4.0~10V
– Firmware Upgradeable
– Compatibility: FrSky X-series Module & Radio in D16 Mode
– Smart port ready
– S-BUS/CPPM output (BLUE LED stay lit indicates XSR-M in S-BUS mode, otherwise in CPPM mode) Features
– How to switch S-BUS and CPPM signal: Long press the F/S button on the receiver for 3 seconds, the GREEN LED will flash thrice, indicating the switch is completed

6A BLHeli_S Dshot 2 In 1 ESC: ( More Details)
Model:BS06D
Con. Current: 6A
Peak Current(10s): 10A
Input Voltage: 2S Lipo
BEC: No
Programming : YES
Cleanflihg/Betaflight pass-through ready
Firmware: Blheli_S 16.5
Net Weight: only 1.7g (Not include wire)
Size:20*20mm
Mount hole: 15mm*15mm M2
6DOF F3 Flight Control Integrated with PDB BEC
Model: F3T
Mount Hole: 15x15mm M2 Screw
Size: 20x20mm
Weight: 1.6g
Working Voltage: 2-4S Lipo Direct power
Firmware version: Betaflight 3.1
Processor: STM32 F303 MCU
SPI Sensor: MPU6000
BEC: 5V@1A
SBUS/PPM/DSM2/DSMX input (Pin headers)
ESC Dshot protocol compatible (Need not modify)
5V@1A BEC
3.3V output for spectrum Satellite Receiver
Firmware target: Omnibus
Build in PDB

-ESC Dshot protocol compatible (Don’t need modify)
-with 3.3V output for spectrum Satellite Receiver
-Build in PDB
-LED Strip solder pad ready
-Buzzer solder pad ready

Package Included:
1x Frsky XSR-E Receiver
2x 6A 2 In 1 ESC
1x F3 Flight Controller

Cet article NEWS: Eachine TeenyCube, a 8.8g 20mmx20mm 3-in-1 cube est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article