NEWS: Grasshopper-94

[Drone News]

And the valse of microbrushless FPV racer continues. Here a 94mm machine wiht the Grasshopper-94: http://www.gearbest.com/brushless-fpv-racer/pp_663417.htmlFor the electronic, everything ultraclassic now: F3+OSD flight controller, 1104/7800kv (so a bit fast for 3S maybe), 4-in-1 BLheli_S/Dshot600 ESC board and a classic 600TVL 48CH 25mW AIO FPV camera. The machine comes with a 2S LiPo (only). The design reminds a bit the Wasp design with these lateral carbon structures. Comes without receiver. No information of the thickness of the lower main carbon stucture but from photo I don’t think it’s larger than 2mm.

Description:
Grasshopper – 94 94mm mini FPV racing drone is a brilliant racer which has an amazing competence in bringing you the unprecedented flight. With an 80C high discharge rate LiPo, you are able to enjoy piloting the drone at a high speed with maximum immersion. More importantly, you are allowed to adjust the parameters via BetaFlight ground station or with the transmitter, know the real-time RSSI whenever you want.

Main Features:
– Efficient flight because of the 94mm small wheelbase, aerodynamic canopy, and 1104 7800KV brushless motors
– Minicube F3 flight controller supports CleanFlight and BetaFlight; self-balancing, semi-self-balancing and manual mode
– OSD and ESC settings can be adjusted remotely by the BetaFlight ground station and the transmitter respectively
– BLHeli – S ESC uses DShot600 ( default ) to ensure the anti-interference and fast responses for freewheeling
– 600TVL CMOS camera works with the VM275 5.8G 48CH 25mW VTX, offering you the real-time FPV within 150m

Specifications:
Wheelbase: 94mm
Weight: 68g ( not including battery )
Brushless motor: 1104 7800KV
Brushless ESC: 4-in-1 BLHeli – S 10A
Propeller: 50mm five-blade
Camera: 600TVL HD CMOS
Video transmitter: VM275 5.8G 48CH 25mW
Flight controller: Minicube F3 6DOF with OSD
Buzzer size: 10 x 20mm ( with integrated LED )
Battery: 7.4V 550mAh 80C LiPo ( included )
Flight time: 3 – 5 minutes

Minicube F3 6DOF Flight Controller
Size: 27 x 27 x 5mm
Mounting hole spacing: 20mm
Processor: STM32F303 MCU
IMU: MPU6000 SPI
OSD display: battery voltage, RSSI, flight mode, flight duration, aircraft name etc.
Firmware: OMNIBUSF3 BetaFlight 3.1

Minicube 4-in-1 BLHeli – S 10A ESC
Size: 27 x 27 x 5mm
Mounting hole spacing: 20mm
Processor: BB2 48MHz chip
Firmware version: BLHeli – S 16.5
Continuous current: 4 x 10A
Peak current: 4 x 15A ( up to 10 seconds )
Power supply: 2 – 3S LiPo
BEC output: 5V 1A
Programmable: yes
BetaFlight passthrough ready
DShot600 ( default ) ready

Cet article NEWS: Grasshopper-94 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article