NEWS: Happymodel Mantis85 (F4+OSD, 1102/9000Kv, 6A BLheli_S/Dshot600, AFHDS-2A, RTF)

[Drone News]

The new chinese compagny “Happymodel” introduces a 85mm brushless FPV racer with the Mantis85: https://www.banggood.com/Happymodel-Mantis85-85mm-FPV-Racing-Drone-RTF-w-Supers_F4-6A-BLHELI_S-5_8G-25MW-48CH-600TVL-p-1221699.html
We have a full carbon fiber glass based machine with a F4+OSD flight controller, a 6A 4-in-1 ESC BLheli_S/Dshot 600 ready board, 1102/9000Kv motors and a classic 600TVL CMOS 48CH/25mW AIO FPV module. The lens orientation can be manually ajusted. That’s a good point. Notice the bundle comes in RTF format with a FlySly AFHDS-2A solution. The machine standalone weights 50g and you will need to add around 20g with the 2S 400mAh LiPo. A buzzer is even here. From a first glance, no real major drawback in the design can be observed and the introduction price is super agressive 137USD !!! so close to be twice more cheaper than some SPCmaker products for example. Can be a very nice first FPV bundle. Wait & See.

Specification:
Brand name: Happymode
Item name: Mantis85 85mm FPV Racing Drone
Wheelbase: 85mm
Size:100mm*100mm*25mm
Weight: 49g( battery not include)
Flight controller: Supers_F4 Flight controller built-in OSD
Motor: Happymodel SE1102 KV9000
Propeller: 48mm 3-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Remote controller: Flysky FS-I6, MODE2 left throttle
Battery: 7.4V 400mah 30C lipo battery
OSD: Betaflight OSD
Firmware of Flight controller: Betaflight 3.1.7
Flight time : 4minutes
Buzzer Ready

Flight controller:
Size: 20mm*20mm
Mount hole: 16mm*16mm
Processor: STM32F405RGT6 MCU
Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD ( Batt voltage, RSSI, Fly mode , Flytime, Craft name etz.)
Firmware version: Betaflight 3.1.7 Dshot600 ready
Target: OmnibusF4SD

ESC:
Size:25mm*29mm
Mount hole: 16mm*16mm
Firmware version: BLHELI_S 16.5
BB2, 48MHZ Chip
Lipo Battery: 1-2S
Con. Current: 6A
Peak Current: 10A (5S)
Programming: YES
Betaflight passtrough ready
Dshot600 ready(Default)
Support oneshot42 oneshot125 Multishot Dshot

Flysky FS-I6:
Channels: 6 Channels
Model Type: Glider/Heli/Airplane
RF Range: 2.40-2.48GHz
Bandwidth: 500KHz
Band: 142
RF Power: Less Than 20dBm
2.4ghz System: AFHDS 2A and AFHDS
Code Type: GFSK
Sensitivity: 1024
Low Voltage Warning: Less than 4.2V
DSC Port: PS2
Output: PPM
Charger Port: No
ANT length: 26mm*2(dual antenna)
Transmitter Weight: 392g
Package Weight: 628g
Transmitter Size: 174x89x190mm
Package Size: 23.5×21.2×10.6cm
Power: 6V 1.5AA*4 (Not Included)
Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight.
On-line update: Yes
Color: Black
Certificate: CE0678,FCC
Model Memories: 20
Control Range: 500m

Features:
-Full carbon fiber glass and CNC aluminum alloy structure
-Extremely light and Solid Frame
-More powerful SE1102 motor
-More powerful STM32F4 MCU + BLHELI_S ESC make your Operating feel more stability and silky
-Adjustable Angle of Camera
-Jaw-dropping flight performance
-Betaflight support
-Acro mode / Air mode /Angle mode support
-Built-in OSD(Using F4 MCU controls OSD over SPI bus in DMA mode)
-OSD Configuration has been include in BETAFLIGHT GUI
-Radio Stick to control PID Tunes
-BLEHELI_S pass-through ready
-Frsky Mode :Telemetry RSSI Output ready

Package included:
1 x Happymodel Mantis 85 Frame kit
1 x Super_s F4 Flight controller build-in Betaflight OSD
1 x Flysky AFHDS2A Receiver
4 x Happymodel SE 1102 KV9000 brushless motor
1 x Super_S BS06D 4 in 1 ESC Dshot600
4 x 1935 3-blades propeller CW
4 x 1935 3-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch camera
1 x 5.8g 25MW 48CH NTSC/PAL VTX with Raceband
1 x 7.4V 400mah 30C lipo battery
1 x Buzzer
1 x Flysky FS-I6 remote controller MODE2 left throttle

Cet article NEWS: Happymodel Mantis85 (F4+OSD, 1102/9000Kv, 6A BLheli_S/Dshot600, AFHDS-2A, RTF) est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article