NEWS: SPCMaker 110VT

[Drone News]

SPCmaker introduces a new brushless racer whti the 110VT: https://www.banggood.com/SPC-Maker-110VT-110mm-Brushless-FPV-Racing-Drone-F4-BLheli_S-40CH-RunCam-Micro-Swift-2-600TVL-BNF-p-1228442.html
Each time we have the last technologies included: a great 600TVL CCD WDR FPV camera, F4+betatlight OSD, buzzer, strong 4S 20A BLheli_S/Dshot 4-in-1 ESC board and now some 1106/5500Ks so even stronger/powerfull motors. The 5.8G VTX can be turned into 25mW or 100mW. Three choices of receiver are propsed: FrSky D16 (XM+), FlySky AFHDS-2A and Spektrum DSMX. The structure is full 3K carbon based with 3mm of thickness for the arm/lower plate. The total weight should be around 116g. On the paper, this new SPCMaker product …. but as you will see relatively soon with my review of the 90NG, SPCmaker can fail completly a product. For the 90NG, out of the box this machine is completly unflyable… gyros are completly lost/confused by transmitted vibrations. Even soft-mounting doesn’t really help…It’s surprizing because the former 95GL received my SeBy’s award, it was a so good machine. I really hope this new SPC 100VT product will work flawless. Wait & See.

Description:
Brand name: SPC Maker
Product model: SPC 110VT
Wheelbase: 110mm
Size: 88mm*104mm*34mm
Weight: 84g (without battery)
Flight weight: 116g(Include battery
Material: 3K carbon fiber
Motor: 1106 5500KV brushless motor
ESC: 20A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 2.5 inches 3-blades propeller
Receiver: original Frsky XM+, compatible DSMX / Flysky AFHDS-2A
Camera: RunCam Micro Swift 2 1/3 “600TVL FPV camera 2.3mm lens CCD
VTX: 5.8g 25MW-100MW 40CH Video transmitter
Flight controller: Omnibus F4
OSD: Betaflight OSD
Firmware of flight controller: betaflight_3.2.0_OMNIBUS F4
Flight time: 3 minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 350mAh 60C lipo battery

VX86-2 20A 4 IN 1 DSHOT ESC 2-4S Lipo
Continuous Current: 20A
Burst Current: 25A=10S
Input Voltage: 2S-4S LiPO
BEC: No
Dimensions: 29x31mm
Weight: 4.9g
Firmware: BLHeLi_S
Input signal: Dshot150 & Dshot300 & Dshot600(PWM are not recommended)

VX86-3 25mW/100mW 5.8G 40CH 5645-5945MHz VTX
Input voltage: 5-6V
Power: 25mW/100mW can be select
Operation Current: 310mA@5.5V@25mW / 350mA@5.5V@100mW
Frequency range: 5.8G 40CH 5645-5945MHz
Dimensions: 17x22mm
Weight: 2.5g
Independent external power amplifier for better signals.

RunCam Micro Swift 2
Image Sensor: 1/3″ SONY Super HAD II CCD
Horizontal Resolution: 600TVL
Lens: 2.3mm Lens(M8) FOV145°
Signal System: NTSC
S/N Ratio: >60dB (AGC OFF)
Electronic Shutter Speed: 1/60~100,000
Auto Gain Control (AGC): Yes
Back Light Compensation (BLC): Yes
Min. Illumination: 0.01Lux@1.2F
WDR: D-WDR
DNR: 2DNR
Day/Night: Color/Auto/B&W
Power: DC 5-36V
Net Weight: 5.6g
Dimensions: 19mm*19mm*19mm

Compatible:
1. DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2. Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D16 mode), and XJT (D16 Mode), DJT DFT DHT Transmitter.
3. Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control.

Package included:
1 x SPC Maker 110VT frame
1 x Omnibus F4
1 x Receiver
4 x 1106 5500KV brushless motor
1 x 20A Mini 4 in 1 BLheli_s ESC
4 x 2.5 inches 3-blades propeller CW
4 x 2.5 inches 3-blades propeller CCW
1 x RunCam Micro Swift 2 2.3mm CCD camera
1 x 5.8G 25mW-100mW 40CH VTX
2 x 11.1V 350mAh 30C lipo battery (comes without charger)
1 x WS2812 LED Board
4 x 3*100mm nylon band
2 x 12mm*150mm magic band
2 x 15mm*50mm back to back with 3M rubber magic belt
1 x XT60 female plug to XT30 male plug converter
1 x Carrying case

Cet article NEWS: SPCMaker 110VT est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article