NEWS: LightSpeed BeeBee-66 Lite

[Drone News]

Remember the BeeBee 66 ?, a compact 1S 66mm brushless FPV machine with a carbon prop guard structure and a AIO top canopy element ?

Now here is the lite version: https://www.banggood.com/Full-Speed-Beebee-66-LITE-RC-Drone-FPV-Racer-ARF-Omnibus-F3-OSD-5_8G-40CH-4-In-1-6A-Blheli_S-ESC-1S-p-1239529.html where basically both the carbon prop guard and the full top plastic canopy structure have been removed. The weight goes from 28.2g down to 23.9g so close to 4.3g of gain (~18%). All the electronic remains the same:
a F3 Tiny+OSD board, 4-in-1 6A BLheli_S/Dshot ESC board and 0703/15000Kv Lightspeed branded brushless motors. The FPV rig is a classic 600TVL CMOS camera+40CH/25mW VTX AIO module installed on a 3D printed camera support. The X-frame seems to be 1mm thick. I regret the absence of a LiHV battery to boost even more performances and even more the absence of a builtin buzzer… since this machine will be an outdoor flyers. The total weight without the receiver is announced to turn about 32g… so with a super light FrSky XM for example, it should turn around 34g. In the lite version, the BeeBee 66 remains me the Eachine Chaser 88 but in a shrinked edition.

Specification:
Brand name: Full Speed
Item name: Beebee – 66
Wheelbase: 66mm
Product size: 85 x 85 x 38mm
Product weight: about 32g (with battery)
Motor: 0703 15000KV brushless motor
Flight controller: Teeny 1S F3 built-in OSD
ESC: 6A BLHeli_S 1S 4in1 ESC Dshot600
Propeller: 40mm 3 – blade propeller
Camera: S2 25mW 40CH
Flight time: 2.5 – 4 mins
Battery: 3.7 – 4.35V 260mAh 30C HV LiPo
Package size: 15 x 8 x 4cm
Package weight: 85g

Teeny1s F3 Flight Controller:
Size: 20 x 20 x 5mm
Mounting hole: 16 x 16mm
MCU: TM32 F303 MCU
Sensor: SPI sensor MPU6000
Built-in BetaFlight OSD
Firmware: OmnibusF3 BetaFlight 3.1 Dshot

Teeny1S 6A 4in1 Brushless ESC:
Size: 20 x 20 x 5mm
Mounting hole: 16 x 16mm
Firmware: BLHeli_S
Lipo battery: 1S
Continuous current: 6A
Peak current: 7A (5S)
Support Dshot600
Brake function in default

Features:
Super tiny & easy to carry
Ligh & safe for indoor flight
Better control than brushed drone
Support Cleanflight & BetaFlight
Support Angle / Horizon / Acro mode
OSD in-build

Note:
Compatible receiver: PPM / SBUS / DSM

Package included:
1 x Beebee-66 Lite Frame Kit
1 x Teeny1S F3 Flight Controller
1 x Teeny1S 6A 4in1 Bushless ESC
4 x 0703 15000KV Brushless Motor
2 x 40mm CW 2-Blade Propeller
2 x 40mm CCW 2-Blade Propeller
1 x S2 25mW 40CH VTX
1 x 3.7 – 4.35V 250mAh 30C HV LiPo
1 x USB Converter
1 x 1S HV LiPo Charger

Cet article NEWS: LightSpeed BeeBee-66 Lite est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article