NEWS: Happymodel Trainer 90

[Drone News]

There is a new brushless compact FPV racer in 90mm size: https://www.banggood.com/Happymodel-Trainer90-FPV-Racing-RC-Drone-BNF-Omnibus-F3-OSD-5A-Blheli_S-ESC-5_8G-25mW-48CH-VTX-1S-p-1251252.html

The trainer 90 is full carbon based and come fully disassembled. Luckely, connectors are here everywhere and it should take 5-10min maximum to build the machine. Important remark: no propguard, no camera pod, no motor protection… and the flight controller is directly exposed… so .. the durability of the machine is clearly raised especially for 0703/0706 motors known to be fragile… the top part can pop up more easily. For the electronic, we have a basic F3+OSD flight controller, a 4-in-1 1S 5A BLheli_S/Dshot600 ESC board. The FPV rig is classic with a 600TVL CMOS 1/4″ sensor + 48CH/25mW 5.8G VTX. An originaly….. you can choose between 0703 15000Kv or 0706 type…. The weights will go from 24.7g to 30g… for the 0706 version more adapted for outdoors applications. I would say the 0703 can be more an indoors trainer while the 0706 more for outdoors…. Two choices of microreceiver are proposed: a FrSky D8 with RSSI or a FlySky AFHDS-2A. The battery is a LiHV model to boost even more performances.

Specification:
Brand name: Happymodel
Item name: Trainer90 FPV Racing Drone
Flight controller: Fusion X3 Betaflight 3.2 F3 Flight controller built-in OSD and 4IN1 5A ESC
Motor: Happymodel 0703 or 0706 15000KV brushless motor
Propeller: 56mm 2-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW 48CH Video transmitter
Battery: 3.8v 250mah or 450mah 30C lipo battery
OSD: Betaflight OSD
Flight time : 3minutes
Buzzer Ready
0703 version weight: 25g without battery; 31g with battery
0706 version weight: 25g without battery; 31g with battery

Receiver Option:
-Frsky FD800 D8 mode SBUS receiver (RSSI ready)
-Flysky FS82 8ch AFHDS2A receiver Ibus output with Failsafe
-Specktrum DSM2/DSMX Compatible receiver

Features:
-Extremely light and more powerful
-STM32 F303MCU + BLHELI_S ESC make your Operating feel more stability and silky
-Jaw-dropping flight performance
-Betaflight support
-Acro mode / Air mode /Angle mode support
-Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
-OSD Configuration has been include in BETAFLIGHT GUI
-Radio Stick to control PID Tunes
-BLEHELI_S pass-through ready

Package Included:

0703 Version
1 x Trainer90 Frame
1 x VTX &Camera Fixed mount holder
4 x 0703 KV15000 Brushless motor
1 x Fusion X3 flight controller
1 x 600TVL Camera+25MW VTX
2 x 56mm propellers(4pcs/set)
1 x Receiver (optional)
1 x 3.8V 250MAH 30C HV LIPO battery
1 x 1S LIHV charger
1 x Buzzer

0706 Version
1 x Trainer90 Frame
1 x VTX &Camera Fixed mount holder
4 x 0706 KV15000 Brushless motor
1 x Fusion X3 flight controller
1 x 600TVL Camera+25MW VTX
2 x 56mm propellers(4pcs/set)
1 x Receiver (optional)
1 x 3.8V 250MAH 30C HV LIPO battery
1 x 1S LIHV charger
1 x Buzzer

Cet article NEWS: Happymodel Trainer 90 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article