Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: HGLRC Hornet 120


Drone News

Recommended Posts

In the valse of the new racers of the week, a novel addition with the HGLRC 120mm: https://www.banggood.com/HGLRC-HORNET-120mm-FPV-Racing-Drone-PNP-Omnibus-F4-OSD-13A-Blheli_S-ESC-5_8G-25100200350mW-VTX-p-1254621.html

Full carbon based with a thickness at least of 2mm for both arms and the central cage. Of course from now, there is a F4+OSD flight controller but with MPU6800 gyros, a good news for the stabilization after the SPCmaker 90NG fiasco. Strong 13A (20A@peak) BLheli_S/Dshot600 ESC … officially only supporting up to 3S…. but probably more.. The FPV rig is based on a super 600TVL CCD Super HAD II CCD sensor’s based camera and a 48CH VTX delivering up 350mW. The general architecture looks solid… A +5V/3A builtin BEC so no problem to feed both the FPV rig and the receiver. It’s a PNP machine so you will have to provide your own receiver and battery…. Seems a nice racer … but I would like to see a model with a builtin runcam swift micro … to record in 1080p@60 as well 🙂

HGLRC-_HORNET-120-1

HGLRC-_HORNET-120-2

HGLRC-_HORNET-120-3

HGLRC-_HORNET-120-4

HGLRC-_HORNET-120-5

HGLRC-_HORNET-120-6

HGLRC-_HORNET-120-8

HGLRC-_HORNET-120-9

Specification:
Brand name: HGLRC
Item name: HORNET 120mm FPV Racing Drone PNP
Frame Kit: 120mm carbon fiber (3mm)
Flight controller: HGLRC XJB F413(Omnibus F4.V2-Blheli_S 13A)
VTX: HGLRC XJB-TX20.V2 20X20MM
PIT/25/100/200/350mW
Camera: HGLRC XJB-ELF Camera
Motor: HGLRC FH1106 6000KV 2-3S
Propeller: HGLRC 2540-3
Weight: 78g (without battery)

HGLRC XJB F413 Omnibus F4.V2
Micro F4.V2 Flight Control Board ( D-Shot Version)
MPU: MPU6000-SPI
CPU: STM32F405RGT6, dual 8K.
Black Box: Flash 16M
Input Voltage: 2-4S Lipo
Built-in Betaflight OSD to adjust PID
BEC Output: 5V@3A
Size: 25x25mm board, 20mm mounting holes (M2)
Weight:2.3g
Support Subs/PPM/DSMX receiver

HGLRC 13A 2-3S Blheli_S BB2 4 in 1 ESC:
Input Voltage: 2-3S Lipo battery
Constant Current: 13A
Peak Current: 20A
BEC Ouput: NO
Firmware: BLheli_S 16.5
Size: 23x23mm ( including pad)
Installing Hole: 20x20mm, M2
Weight: 3g
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: TOP QUALITY MOSFET
Firmware: Betaflight 16.5
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse

HGLRC XJB-TX20.V2 20X20MM
Output power: PIT/25mW/100mW/200mW/350mW switchable
Control mode:BFOSD control(RX) / Button
BAT: 7-26VBEC 5V-1A
240mA—-350mW
Video system: NTSC/PAL
Antenna: IPEX
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
Size: 24*24mm(L*W)
Mounting Hole:20*20mm
Weight: 2.4g

HGLRC XJB-ELF Camera
Image Sensor: 1/3″ SONY Super HAD II CCD
Horizontal Resolution: 600TVL
Lens: 2.3mm Lens
FOV: 120 degree(2.3mm)
Signal System: PAL / NTSC
S/N Ratio: >60dB(AGC OFF)
Electronic Shutter Speed: PAL:1/50 ~ 100,000; NTSC:1/60 ~ 100,000
AutoGain Control(AGC): YES
Back light compensation(BLC): YES
Min.illumination: 0.01Lux/1.2F
WDR: D-WDR
DNR: 2DNR
Day/Night: Color / Auto / B&W
Power: DC 5 to 36V
Net weight: 5.6g
Dimensions: 19x19x19mm

Package Included:
1x HGLRC 120m Carbon Fiber Frame Kit
1x HGLRC F4.V2 AIO OSD BEC FC
1x HGLRC 13A Blheli_S 4-in-1 ESC
1x HGLRC TX20-V2 VTX
1x HGLRC XJB-ELF CAMERA
4x HGLRC HF1106-6000KV
1x LED+BB buzzer
6x HGLRC 2540-3s props
1 x Battery Strap

Cet article NEWS: HGLRC Hornet 120 est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...