Quantcast
Jump to content


  • Sign Up, it's FREE!

    Welcome to RC Drone Forum! Use the main menu and search bar to navigate our site. It's always FREE to join our Drone Community and post in our forums, create your own Drone club, share your photos and videos and more. It's easy to get started and you can login with some of these popular social networks.

NEWS: URUAV UR65: 65mm/27g AUW/0603 motors


Recommended Posts

Remember my last SeByDocKy’award ? The excellent Happymodel Snapper6 ? A great 65mm brushless FPV racer with strong 0603/19000Kv motors and the excellent F3 Crazybee flight controller Here is new machine based on the same architecture/FC: https://www.banggood.com/URUAV-UR65-65mm-FPV-Racing-Drone-BNF-Crazybee-F3-Flight-Controller-OSD-5A-Blheli_S-ESC-5_8G-25mW-VTX-p-1295884.html
Same FC with a builtin FrSky D8/D16 receiver, same 250mAh LiHV batteries same 0603 motors but slightly slower (17000Kv vs 19000Kv). In the other hand the frame full nylon based is close to 3g lighter !!!! With the battery the total weight is announce to be around 27g… It should compensate without problem the little lost in motor thrust. The Crazybee FC is a great board with builtin 5A ESC, builtin receiver in SPI mode (FrSky or FlySkyà, super stable even in angle mode. The AIO module is the same than the Snapper6, based on a 700TVL NTSC CMOS camera + 48CH/25mW VTX. At least for the FrSky version, the machine displays the RSSI for the OSD but also export it via telemetry. More it also includes a current sensor. The machine is proposed with two type of bundle: a standard with one unique battery or with three batteries and a charger. I can image how sporty can be this machine with the Happymodel 0603/19000Kv motors (some 22000Kv from racerstar are also announced).
Wait & See.

null

null

null

null

null

null

null

Specifications:
Brand Name: URUAV
Mode Name: UR65
Item Name: 1S 65mm Brushless Whoop racer drone BNF
Wheelbase: 65mm
Size: 81mm*81mm*36mm
Weight: 20.5g(without battery)
Weight: 27g(with Original 250mah lipo battery)

SE0603 KV17000 Motor

Mode: SE0603 KV17000
Configu-ration:9N12P
Stator Diamter:6mm
Stator Length:3mm
Shaft Diameter:F0.8mm
Motor Dimension(Dia.*Len):F9mm*15.5mm
Weight(g):1.8g
No.of Cells(Lipo):1S

Flight controller

Firmware: Betaflight_3.3.0_Crazybee
Betaflight target:
CRAZYBEEF3FR(Frsky version)
CRAZYBEEF3FS(Flysky version)
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Frsky receiver with telemetry(D8/D16 switchable)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 14A
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready

Onboard 4in1 5A ESC
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Default protocol: DSHOT600

Frsky receiver Version
SPI BUS receiver
Frsky D8/D16 switchable
Compatible both D8 and D16 transmitter
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Flysky receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support

AIO Camera&VTX

Output power: 25mw
Frequency: 48CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 6 bands 48 channels
With Raceband: 5474 5945 MHZ
Size: 13.9″12.0mm ( L*W )
Weight: 3g

Lipo Battery
Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx7mm
Weight: 6.5g
Connector: PH2.0

Features:
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
Powerful Brushless motor and Smooth ESC
Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
Adjust the settings and the PID of the flight controller via OSD
Frsky version support both D8 and D16 Frsky transmitter
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version

Package Included:

Basic version
1 x 65mm Brushless whoop Frame
1 x Crazybee F3 FC (Frsky and Flysky option)
1 x 5A 4in1 ESC
4 x SE0603 KV17000 Motor
1 x 31mm propeller(4cw+4ccw)
1 x AIO Camera & VTX
1 x 3.8v 250mah 30C/60C battery

View the full article

Link to comment
Share on other sites



Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...