NEWS: Fullspeed Leader 2.5SE

[Drone News]

FullSpeed a new FPV machine’s producer who collected recently good feedbacks with their last models. Here is a new PNP revision of their 2.5″ success story, the Leader 2 SSE: https://www.banggood.com/FullSpeed-Leader-2_5SE-120mm-FPV-Racing-Drone-PNP-F3-OSD-28A-BLHELI_S-2-4S-600mW-Caddx-Micro-F2-p-1366576.html

Basically we have the same highly profiled carbon based structure super durable to massive crashes. Arms are 3mm thick for example. We have this nice 3d-printed top canopy structure protecting the electronic tower but also shaping the machine into a shark animal. For the electronics… it’s a classic but solid solution: F3 + BFOSD compatible FC, 28A 4S compatible BLheli_S 4-in-1 ESC (not yet BLHeli32). Associated motors are 1106/7500Kv ultrapowerfull model but definitively requiring a super strong battery with a huge discharge rate. As novelty, probably a Caddx Micro F2 FPV camera is now here. It’s a CMOS model but with a great light sensitivity and WDR feature. For the VTX controls can be done via the OSD and can deliver up to 600mW over 48 channels. If Leader 2.5SE is not a revolution in the FPV market, for example no Runcam split mini 2 combo installed as for the futur SPCMaker K1 (should be reviewed soon in D-M), it’s a solid machine and can represent an excellent 2.5″ choice.

Specification:
Brand Name: FullSpeed
Item Name: Leader 2.5SE FPV Racing Drone
Weelbase: 120mm
Net Weight: 88g
Thickness of bottom plate: 3mm
Thickness of side plate: 2mm
Flight controller: FSD F3 built-in OSD
ESC: FSD 28A BLHELI_S 2-4S 4in1 ESC Dshot600
Motor: 1106 7500KV
Propeller: FSD 2535
Camera: Caddx Micro F2
VTX: FSD TX600 25/100/200/400/600 switchable VTX

FullSpeed FSD F3 Flight controller
Size: 27.5mm * 27.5mm * 5mm
Mounting hole: 20mm * 20mm
MCU: STM32 F303
Built-in Betaflight OSD
BEC: 5V 3A

FullSpeed FSD 28A BLHELI_S 4in1 ESC
Size: 27mm * 27mm * 5mm
Mounting hole: 20mm * 20mm
Firmware: BLHELI_S
Input voltage: 2-4S
Continuous current: 28A
BEC Ouput: NO

FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter
Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode:BFOSD control(RX)/button
Video system: NTSC/PAL
Antenna: IPEX
BAT: 5V Recommended
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
(TX600’s factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations
if you need to unlock the frequency.)
Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

Package Included:
1 x Leader 2.5SE frame kit
1 x FSD328 F3 28A Flight tower
4 x 1106 7500KV Brushless motor
2 x FSD 2535propeller (CW)
2 x FSD 2535propeller (CCW)
1 x Caddx Micro F2
1 x FSD TX600 25mW-600mW VTX FPV Transmitter

View the full article