NEWS: ImmersionRC Vortex 150 mini

[Drone News]

Probably one of the most advanced and awaited mini brushless racer, the ImmersionRC Vortex 150mm: http://www.banggood.com/ImmersionRC-Vortex-150-Mini-150mm-F3-OSD-600mW-40CH-FPV-Racer-PNP-p-1099538.html

This machine not only breaks the 250g limitation but offers many improved features. The FC is equiped with two F3 processors to reach 8Khz in the main control loop…. controls must be super precize. The main board weights only 6.5g and includes a 5.8G VTX up to 600mW. More the Frequency selection can be done via the radio so no need to manipulate the quad. For race competition, the main board is compatible with the Touch & race system where the race supervisor can assign for each participant their associated Vfreq. The video link includes also an OSD. 16A ESC supports multishoot technology.

Specification:
Brand name: ImmersionRC
Item name: Vortex 150 FPV Racer
Wheelbase: 155mm
Arms: 2mm Flat CF/Plastic Hybrid
Frame: 2mm CF, with Aluminium Standoffs
Motors: Custom 1306-3100kV, 2mm Shaft
ESC: 16/20A EzESC Gen3
ESCs: Full Custom, 16A cont. 20A peak, rotorSENSE, OneShot125, OneShot42, Multishot
Flight Controller: STM32F303 based (‘F3’)
Gyro: SPI Gyro, for 8kHz loop speeds
OSD: Full Graphic
Video Tx Power: 600mw 40CH
Receiver Compatibility: CPPM, S-Bus, Spektrumÿ, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)
FPV Camera: FatShark 600TVL CCD (HS1177 sensor + chipset)
Flight Time: Highly dependent upon battery, and flying style, 3-4 mins typical
Power Requirements: 3s-4s LiPo, 4s 750mAh >45C recommended
Weight: <249.99g w/500mAh pack
Note: Compatible receiver and display device required for initial setup and use, not included.

Feature:
Twin F3 Processors (Flight Control, and OSD)
3rd Gen 16A EzESCs, With OneShot125/42, and MultiShot support
Fusion of 3k weave Carbon Fibre and molded, tough plastic
Direct connection to PPM, Spektrum, S-Bus, XBus receivers
4s 500mAh ÿ 750mAh battery recommended

Package Included:
1 X Vortex 150 Frame
4 X ESC
4 X Motor
4 X 3? Tri-Blades
1 X 5.8G 40CH TX Module
1 X FPV Camera

with FPV feedback including OSD informations

Cet article NEWS: ImmersionRC Vortex 150 mini est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article