NEWS: Markerfire MICRO, the “ready to go” TinyWhoop

[Drone News]

If you don’t want or not able to mod the indutrix or the Eachine E010 to have a full FPV tinyWhoop, there is the Malerfire MICRO ready to go for you: http://www.gearbest.com/multi-rotor-parts/pp_591322.html
With this new chinese machine, you have already a F3 evo board with a buitlin DSM2 receiver, a 520TVL CMOS camera and strong & fast 0615 coreless motors. The announced flight time with the 200mAh is around 5min. The price is correct too …. can be a super popular machine. The FPV antenna have been replaced for a little bit less efficient but more robust linear antenna…. Could be the perfect winter compagnon

Main Features:
– DSM 8CH receiver, compatible with Spektrum DSM2 DSMX transmitters
– 615 high PRM coreless motors offer you the desirable velocity
– Fascinating FPV experience with high speed and camera tilting up at 10 degree
– 5.8G 40CH 25mW video transmitter, 520TVL camera with 120 degree FOV NTSC / PAL switchable
– F3 EVO brushed flight controller supports CleanFlight and BetaFlight
– 3.7V 200mAh 35C LiPo battery
– 64mm, 22g, as big as your palm, extremely portable
– Colorful LED board at the rear helps to know the direction
– Ducted fan design effectively reduces the air resistance
– Plug-in modular design, namely, soldering is unnecessary

Specifications:
Flight controller: F3 EVO with STM32 F303 MCU
Receiver: DSM 2.4GHz 8CH
Video transmission: 5.8G 40CH 25mW
Video resolution: 520TVL
Receive distance: 300m
Motor: 615 coreless motors with 65000 RPM
Battery: 3.7V 200mAh 35C
Flight time: about 5 minutes
Charge time: 30 minutes
Charging method: USB
Additional gimbal installation: not feasible

All ingredients sound good …. Wait & see …

I am pretty sure than BG will sell also the same machine with another name ….

Cet article NEWS: Markerfire MICRO, the “ready to go” TinyWhoop est apparu en premier sur Drone-Maniac !!!!!!!.

View the full article